If you’ve ever shopped around for a ski jacket (or pants), you’re bound to have seen the terms 2L and 3L (short for 2-layer and 3-layer) again and again. These refer to the style of construction used in a waterproof jacket’s shell, including the face fabric, waterproof/breathable membrane, and interior liner. Whether a ski jacket uses a 2- or 3-layer build has several implications for its performance, and below we break down the key considerations. Rest assured: Our team of snow-loving editors has tested dozens of designs over the years in all sorts of conditions, from dreaded rain-on-snow events in the Cascades to blower powder in the Tetons. For more, check out our detailed ski gear reviews.

Editor's note: We updated this article on September 23, 2024, to include considerations about different snow climates and tweak several product references to reflect 2024-2025 offerings.
 


Table of Contents



Ski Jacket Construction

2-Layer Ski Jackets

Jackets with 2-layer constructions feature two key layers: an exterior face fabric and a bonded waterproof/breathable membrane. They also use a hanging liner along the interior to protect the membrane from abrasion, skin oils, etc., generally made out of mesh, taffeta, or soft nylon. The 2-layer jacket category includes both insulated and non-insulated designs—for an insulated jacket, manufacturers place the synthetic fill in between the 2-layer shell and the hanging liner. Two-layer ski jackets generally comprise the budget end of the market (including models like REI Co-op's $229 Powderbound). Still, there are several premium designs that use high-quality Gore-Tex membranes, such as the Patagonia Storm Shift ($499). We recommend 2-layer ski jackets for resort use only—as you’ll read below, their weight/bulk and lack of breathability make them somewhat impractical for backcountry use.
 

Patagonia 2-layer ski jacket (hanging liner)
2L designs feature an exterior face fabric and a bonded waterproof/breathable membrane | Credit: Jason Hummel

3-Layer Ski Jackets

Similar to 2-layer ski jackets, 3-layer designs feature a waterproof membrane bonded to the exterior face fabric. Where they differ is in the use of an integrated liner rather than a hanging liner. This liner is affixed directly to the inside of the membrane, resulting in a sleeker and lighter design that’s much more breathable than a 2-layer jacket. In general, 3-layer jackets are purely shells—insulated designs are very rare—and their streamlined construction results in higher price tags (there are some exceptions to this rule). For example, our top-ranked Arc'teryx Sabre is a whopping $750, but several mid-range options (including the Rab Khroma Kinetic) will run you closer to $400. Their low weight, minimal bulk, and impressive breathability make 3-layer jackets an excellent choice for backcountry use, but they’re also versatile for the resort.
 

Arc'teryx Sentinel LT jacket (interior pocket)
The liner is affixed to the membrane on 3L jackets, resulting in less weight and improved breathability | Credit: Brian McCurdy

2L vs. 3L: Key Considerations

Breathability Advantage: 3L

Breathability is one of the main ways in which 2- and 3-layer constructions diverge. Due to the added bulk of their hanging mesh or taffeta liner, 2-layer jackets can trap heat and become fairly swampy in mild conditions or during high-output activity. On the other hand, a 3-layer jacket’s sleek liner does very little to inhibit the membrane's breathability. Despite their subpar performance, 2-layer ski jackets are perfectly serviceable for most resort skiing, especially for casual skiers who stick primarily to groomers (unzipping the pit vents can help with airflow, too). If your version of skiing involves hiking out of bounds or the odd day of backcountry touring, we strongly recommend opting for a 3-layer jacket.
 

Skinning Uphill in Norrona Lofoten Gore-Tex Pro 3-layer ski jacket
Backcountry skiers will benefit from the added breathability of a 3L design | Credit: Brian McCurdy

Waterproofing Advantage: It Depends

All else being equal, 2- and 3-layer jackets offer a similar level of waterproofing. Both constructions include a waterproof/breathable membrane, which is highly engineered to restrict moisture entering from the outside while allowing air to flow from the inside out. Of course, you'll want to consider the quality of the membrane: Two-layer jackets often employ more entry-level, in-house membranes, while 3-layer jackets are decidedly more premium and more likely to use top-shelf membranes like Gore-Tex. But this isn’t always the case—for example, the Arc’teryx Sabre (3L) and Patagonia Storm Shift (2L) both use the same high-end Gore-Tex membrane. 

There are a few more factors to consider when thinking about waterproofing. The first is shell thickness: The thicker the shell, the more resistant it will be to wetting out. In general, 2-layer jackets tend to have thicker shells (as weight is less of a priority), but we’ve found that most shells around 70-denier (D) and thicker are reliably storm-worthy, including the 80D shell on the Arc’teryx Sabre (3L). Another factor is seam-sealing: Most quality ski jackets feature tape on every seam, but budget designs are only taped on the critical seams, including those at the shoulders, back, and hood. You’d be hard-pressed to find a 3-layer jacket that isn’t fully seam taped, while some entry-level 2-layer designs are just critically seam taped. Be sure to pay attention to this detail, as it will impact your jacket’s waterproofing during long and wet days on the slopes.
 

Skiing in powder (Trew Gear 3-layer ski jacket)
Gore-Tex is the gold standard among waterproof/breathable membranes | Credit: Jason Hummel

Warmth Advantage: 2L

Because of their extra hanging layer, 2-layer jackets can be warmer than 3-layer jackets. This construction can also accommodate insulation between the 2-layer shell and the hanging liner, while 3-layer jackets are almost always uninsulated (Arc'teryx's pricey 3L Macai is one exception). As a result, both uninsulated and insulated 2-layer jackets (like the Trew Gear Jefferson and Patagonia Storm Shift, respectively) are well suited for resort skiers, especially in particularly cold areas like the Rockies or the Northeast. For milder climates or skiers who build heat while exploring the slack- or backcountry, the extra warmth is less of a boon, especially given its impact on breathability.
 

Patagonia 3-layer PowSlayer ski jacket (riding chairlift)
Most insulated ski jackets are 2L designs, although there are some exceptions | Credit: Brian McCurdy

Weight and Bulk Advantage: 3L

Along with breathability and warmth, a jacket’s weight and bulk differ quite a bit between 2- and 3-layer designs. The hanging liner used in a 2-layer jacket adds a significant amount of fabric to the overall jacket. In contrast, the streamlined attached liner (third layer) of a 3-layer jacket is virtually imperceptible. To illustrate, consider the 11.1-ounce difference between the 3-layer Rab Khroma Kinetic (1 lb. 2.9 oz.) and 2-layer Trew Gear Jefferson (1 lb. 14 oz.).While the majority of resort skiers won’t be concerned with additional weight and bulk, it is a consideration for those headed out of bounds or deep into the backcountry—for human-powered activities, you’ll want a streamlined 3-layer jacket that won’t be a strain on your shoulders or inhibit movement and can stuff down into a corner of your pack.
 

Arc'teryx Sentinel 3-layer ski jacket (streamlined build)
3L jackets typically weigh less and pack down much smaller than their 2L counterparts | Credit: Brian McCurdy

Durability Advantage: It Depends

Most ski jackets are decently durable, including both 2- and 3-layer designs. In general, durability is a function of the thickness of the shell fabric (expressed as denier) and the overall build quality of the jacket. Shell denier can vary wildly in both 2- and 3-layer jackets—as examples, the Patagonia Storm Shift (2L) features a burly 150D shell, the Outdoor Research Carbide (3L) has a thin 40D shell, and the Arc’teryx Sabre (3L) lands in the middle with 80D nylon. Generally speaking (and there are many exceptions to this rule), it is common to see thicker materials in 2-layer jackets. This is because most 2-layer jackets are intended for resort use, where a hardwearing shell takes precedence over breathability and weight-savings.

Regarding build quality, almost all 3-layer jackets are on the premium end of the spectrum and exude a high attention to detail, while some (but not all) 2-layer jackets earn their lower price points with downgraded build quality. But chairlift laps and 60-day seasons can put a lot of wear on a jacket—resort skiers who get out a lot will want to opt for a high-end 2-layer jacket (like the Patagonia Storm Shift or Helly Hansen Alpha 4.0) or a 3-layer shell with thick face fabric (look for 70D or higher). On the other hand, backcountry skiers will want to shave weight and bulk with a 3-layer jacket—but keep in mind that the thinner varieties do compromise a bit on durability. 
 

Arc'teryx ski jacket (durability)
Most 3L jackets are premium pieces with high price tags to match | Credit: Jason Hummel

Price Advantage: 2L 

Price is the final consideration in the 2-layer versus 3-layer debate. With a few exceptions, 2-layer jackets are more affordable than 3-layer designs and an excellent choice for resort skiers trying to save a buck or two. For example, our top-ranked Arc’teryx Sabre (3L Gore-Tex) will set you back $750, while the REI Co-op First Chair GTX (2L Gore-Tex) is just $319. These jackets offer similar levels of waterproofing with the same Gore-Tex membrane, but the Sabre is slightly lighter, less bulky, and more breathable. Budget 2-layer jackets can dip as low as $200, but remember these designs are fairly compromised and not a great choice for those who get out a lot.

As we mentioned, though, there are a few outliers. Outdoor Research’s Carbide, for example, is a $329 3-layer jacket (a whopping $421 less than the aforementioned Sabre)—but it does compromise on weather protection and durability with the lower-quality Pertex membrane and thin, 40D shell. And then there’s Patagonia’s premium Storm Shift: a 2-layer jacket that’s $170 more than the Carbide at $499. However, the Storm Shift features a top-shelf Gore-Tex membrane, a durable 150D face fabric, a cozy fleece liner, and really impressive build quality. All told, expect 2-layer jackets to run you between $200 and $500, while 3-layer designs are $300 to $700 (or more).
 

Skiing in 3-layer Black Diamond ski jacket
Infrequent skiers may be able to get away with a budget 2L design, but committed riders will want to spend up | Credit: Jason Hummel

Intended Uses

By now, the differences between 2- and 3-layer construction should be fairly clear. Both can be high-quality and highly waterproof, but 3-layer jackets get the edge in terms of breathability and weight/bulk. On the other hand, 2-layer jackets are warmer (and often insulated) and generally the more affordable of the two. So, which style of ski jacket is best for you?
 

Resort Use

In our opinion, most resort skiers will be well matched with a 2-layer jacket. The dip in breathability won’t be a big deal when you’re riding the chairlift and cruising groomers, and the extra dose of warmth will be a boon in most conditions. Moreover, many 2-layer jackets use particularly thick shell fabrics and are prepared to handle the rigors of resort use. And if you’re concerned about quality, there are a number of premium 2-layer designs, including the Patagonia Storm Shift and Helly Hansen Alpha 4.0. On the other hand, many will opt for a 2-layer design to save cash, in which case jackets like the REI Co-op Powderbound ($229) and First Chair GTX ($319), Trew Gear Jefferson and Astoria ($319), and Columbia Bugaboo ($210) make excellent options.
 

Trew Gear Astoria 2-layer ski jacket (resort use)
2L jackets are our preferred option for resort use | Credit: Jason Hummel

Backcountry Use

If you’re a backcountry skier or like to venture out of bounds at the resort from time to time, a 3-layer jacket is the more high-performance and versatile option. The boost in breathability is fairly necessary for high-output skinning, hiking, and boot packing, and the streamlined weight and bulk will make a difference during long slogs or if you want to stuff your jacket in your ski pack on the uphill. Finally, while 3-layer designs aren’t usually insulated, the simple shell makes it easier to tailor your layers to the day's conditions, whether you need to add a midlayer, choose a thinner baselayer, or swap in synthetic for down. As we mentioned above, 3-layer designs do cover the premium end of the market, but there are a growing number of more affordable—but still very high-quality—options to consider, including the Outdoor Research Carbide ($329), Flylow Malone ($400), and Trew Gear Cosmic ($459).
 

Outdoor Research 3-layer ski Jacket (skinning in mountains)
Backcountry-goers looking to minimize weight and bulk should opt for a 3L design | Credit: Aeron Matthew

Different Snow Climates

While some of us may be traveling between the wet and wild storm days of western Washington to the dry cold of the Colorado Rockies on the regular, most skiers will spend most of their days out in one snow climate. There are three main "snow climates," or buckets of types of snowfall that share common characteristics: Maritime, Continental, and Intermountain. Maritime climates typically consist of wetter, warmer, and heavier snow (think the Cascade concrete of Mt. Baker), justifying the added expense of a thick and fully seam-sealed 3-layer design. Alternatively, a Colorado local living in the Continental dry, cold, and windy environment of Steamboat Springs may opt to prioritize warmth above all else by opting for an insulated 2-layer design. And for riders who primarily ski in an Intermountain snowpack, which shares characteristics of both Maritime and Continental areas, the goal will likely be balanced performance over all-out protection or chart-topping warmth. 


Our Top Ski Jacket Picks

Nailing down the type of jacket that's best for you is an important early step in the buying process. Below are our team’s top 2- and 3-layer selections, including premium, mid-range, and budget picks. For even more options, see our articles on the best ski jackets and best women’s ski jackets.

Premium 3L: Arc’teryx Sabre and Sentinel ($750)
Mid-range 3L: Flylow Malone and Lucy ($400)
Budget 3L: Outdoor Research Carbide ($329)

Premium 2L: Patagonia Storm Shift ($499)
Insulated 2L: Helly Hansen Alpha 4.0 and Alphelia ($475)
Mid-range 2L: Trew Gear Jefferson and Astoria ($319)
Budget 2L: REI Co-op Powderbound ($229)
Back to Our Ski Jacket Construction Guide  See Our Ski Gear Reviews

Powered by Drupal

Ski Jackets: Shell vs. Insulated vs. 3-in-1

Today’s ski jackets are well-made and built to handle many seasons of use in foul weather. They also can be big investments, with even entry-level jackets often setting you back a couple hundred dollars or more. With so many styles to choose from, it...

Best Ski Jackets of 2024-2025

Choosing the right ski jacket is all about managing the conditions that you might encounter on the mountain. This depends on the specific kinds of skiing you enjoy most—skinning up a sunny ridgeline in the North Cascades is far different than bracing...

Best Women’s Ski Jackets of 2024-2025

Whether you’re cruising the resort or earning your turns, a ski jacket is an important component of every skier’s kit. Compared to standard winter coats, these jackets come infused with ski-specific features and prioritize durability and coverage for...

Best Ski Pants of 2024

Ski pants are a critical barrier between you and the elements, and there’s a pair to fit every type of skier and budget. Resort-goers typically opt for a classic hardshell design with some light insulation to stay warm on the lift rides up. Backcountry...

Arc’teryx Sabre Jacket Review

Arc’teryx offers an extensive lineup of quality ski jackets, from technical hardshells to insulated resort options. The Sabre Jacket (formerly the Sabre AR) slots in right in the middle, with a premium Gore-Tex build, light flannel backer, and smartly...

Best Ski Bibs of 2024

Throw out your belts and powder skirts: Bibs offer confidence-inspiring protection against wayward snow, cold drafts, and sagging waistlines. They also provide a considerable bump in storage, allowing...

Flylow Gear Lucy Jacket Review

Available for fall 2020, Flylow Gear’s Lucy Jacket combines the comfort and stretch of a softshell with the durability and protection of a hardshell. We brought the new women’s-specific piece to Crested Butte, Colorado, for testing, and found it to be...

Best Ski Gloves and Mittens of 2024

Nothing ruins a great day on the slopes like frozen fingers, and a quality glove or mitten can make all the difference. Choosing one that fits the conditions and type of skiing you do most is an important decision. The more you ride, the more you...

How to Prevent Your Ski Goggles From Fogging

A quality pair of ski goggles can do a lot to improve visibility on the slopes, but if they get all fogged up, it doesn’t really matter what you’re wearing. The good news is that there are a number of steps you can...